Install & Maintain
Talasey’s paving installation and maintenance range, Pavetuf, provides the tools and
products that you may need to cut, install and joint your paving, through to protecting and cleaning it.
A1 Fire Rated Risers
- Risers
Pavetuf fire-rated, non-combustible pedestals provide a solution for flat roofs, balconies and terraces at height for the installation of porcelain paving or metal joists.
Our Class A-rated products offer superior durability and performance in high-risk environments and are designed to meet the latest fire regulations. Suitable for both residential or commercial applications, the range ensures safety and strength.
FEATURES & BENEFITS
- Class A1 Fire-rated
- High load bearing capacity: 3,000 kg/m²
- Height adjustment ranging from 35mm up to 220mm
- Resistant to temperatures between -25 and +70 °C
- BS EN 13501-1 compliant
- Adjustable at the base with a locking system once the height is set to avoid movement
FIRE RATED OPTIONS
- FS 3.5/4.5 – Fire rated base heights from 35 – 45mm.
- FS 4.5/6 – Fire rated base heights from 45 – 60mm.
- FS 4.5/6.5 – Fire rated base heights from 45 – 65mm.
- FS 6/8 – Fire rated base heights from 60 – 80mm.
- FS 7/10 – Fire rated base heights from 70 – 100mm.
- FS 9/14 – Fire rated base heights from 90 – 140mm.
- FS 13/22 – Fire rated base heights from 130 – 220mm.
- FS C3/4T – Fire rated top plate for porcelain and concrete paving.
- FS CPV+ – Fire rated top plate for decking joists.
We recommend you visit the Knowledge Hub for further information, advice and FAQs.
Riser Accessories
- Risers
We provide a variety of accessories to support your installation, including self-leveling products, slope correctors, rubber accessories, and finishing options for sides, fronts, and walls. Explore our range of accessories to find the ideal solution for your needs.
LEVELLING
We have two levelling options including the HA5 Self Levelling piece and HS2 slope corrector. Both of these can be used when the surface of the installation is slightly uneven.
HA5 Self Levelling – Will correct differences upto 5%. Simply pop into the base wherever needed and the top plate clips in.
HS2 Slope Corrector – Used to reduce inclination differences from 2% to 10%. Each section has a 2% correction. Maximum five numbers per riser, giving a 10% difference. Simply clips to the base bottom.
SIDE, FRONT & WALL FINISHINGS
Our range of side, front and finishing cover side plates, wall finishing and edge finishing plates, allowing you to create a neat and clean finish to your installation.
Side Plates – We offer two side plates to aid installation without the need to cut a normal base. AK3.5/5 with heights between 35mm and 50mm, and AK5/8 with heights between 50mm and 80mm. Place along edges or against walls.
Edge Finishing Plate – An edge finishing plate to keep side fascia in place. Can also be used to create steps. The 2 sections can be simply clipped onto the base bottom and across the spacers on the top plate for the paving or decking to slot into. Ideally these are fitted to the side plates but can be fitted to a normal base by cutting the edge with a hacksaw to the correct size.
Wall Finishing – A 6mm thick self-adhesive protection rubber piece to apply to side of the paving when laying up to a wall.
PROTECTION
For additional protection we offer two rubber pieces. Both are sound and shock resistant, ideal for flat roofs and balconies to assist with noise reduction.
Protection Rubber – A sound and shock absorbing water resistant protection layer. (Not for use on PVC surfaces).
Fitting Piece 2mm – A solid rubber sound and shock absorbing water resistant protection layer for use on top plates.
We recommend you visit the Knowledge Hub for further information, advice and FAQs.
Riser Bases
- Risers
Creating the perfect paving pedestal system for your project is easy with just three simple steps. First, choose the right base for the height you need the risers to adjust to. Our standard range offers heights from 23.5mm to 170mm, allowing for precise millimetre adjustments to achieve a perfectly flat surface. Once you’ve selected the appropriate base, proceed to choose your top plate and any necessary accessories to ensure a smooth and efficient installation.
RISER BASES
All of our Adjustable Riser parts simply slot into each other meaning you can create a bespoke installation based on your site requirements.
We offer a variety of adjustable bases, from 23.5mm heights through to 170mm. Simply select the right base for your application, which can then be adjusted on site to the required height.
PV 2.3/3.5 – Base with heights between 23mm and 35mm.
PV 3.5/5 – Base with heights between 35mm and 50mm.
PV 5/8 – Base with heights between 50mm and 80mm.
PV 8/11 – Base with heights between 80mm and 110mm.
PV 11/14 – Base with heights between 110mm and 140mm.
PV 14/17 – Base with heights between 140mm and 170mm.
EXTENDING YOUR RISER BASES
All our standard base heights can be extended using our F30 extension piece. Up to 9 number 30mm F30 extension pieces can be used on each Riser Base height to achieve higher levels as required.
Riser Top Plates
- Risers
After selecting the appropriate riser base, it’s time to choose your top plate. All top plates are designed to fit seamlessly into any base or side plate, allowing you to pick the one that best suits your application. Whether you’re working with paving, aluminium tracks, or wooden/composite joists, simply select the top plate that meets your needs.
TOP PLATE OPTIONS
C3/4T 3MM Joint – Top plate for porcelain and concrete paving.
CO – Top plate with a flat surface to use when placing additional plates under porcelain and concrete paving, where a spacer is not needed.
C3/4T BT 3MM Joint – For use on paving, with a self-adhesive layer which gives extra fixing support essential for balconies, terraces or flat roofs to reduce the risk of wind lift. Can be used just on the outer row.
C-Clip – Top plate compatible with Pavetuf Aluminium Support System. Width between the lugs is 76mm.
CPV+ – Top plate for wooden or composite joists with a 5-point, rotating fixation at the side to ensure the joist is centered on the plate. The width between the fixation and the lug is 75mm.
F30* – The F30 Extension piece adds 30mm to the riser support, and fits in any base or side base. These are 30mm sections, with a maximum of 9 allowed per riser.
We recommend you visit the Knowledge Hub for further information, advice and FAQs.
Stainless Steel Edging
- Edging
Pavetuf Stainless Steel Edgings create a decorative profile for the edge of 18-20mm porcelain and stone paving. Designed for use externally, with matching internal and external corner pieces, ideal for creating a clean contemporary finish on raised patio areas, steps, swimming pools and borders.
FEATURES & BENEFITS
- External use decorative profile
- Made from 316 grade Stainless Steel
- Internal & External corners available
- Protect paving edges from chips and impact damage.
Pavetuf Stainless Steel Edgings are made from 316 grade Stainless Steel which offers superior resistance to corrosion coming in 2.45 metre straight lengths with Internal and External Corners to help with the ease of installation.
Length 1 (mm)
Length 2 (mm)
Width (mm)
Height (mm)
600
600
500
500
900
900
500
500
Diameter (mm)
Height (mm)
600
500
750
500
950
500
-
Width (mm)
Depth (mm)
Height (mm)
Steel Thickness
-
3003003002mm
-
4004004002mm
-
5005005002mm
-
6006006003mm
-
8004004003mm
-
10004004003mm
-
10005005003mm
-
12004004003mm
-
12005005003mm
Send us a message
"*" indicates required fields