Riser Bases
- Risers
Creating the perfect paving pedestal system for your project is easy with just three simple steps. First, choose the right base for the height you need the risers to adjust to. Our standard range offers heights from 23.5mm to 170mm, allowing for precise millimetre adjustments to achieve a perfectly flat surface. Once you’ve selected the appropriate base, proceed to choose your top plate and any necessary accessories to ensure a smooth and efficient installation.
RISER BASES
All of our Adjustable Riser parts simply slot into each other meaning you can create a bespoke installation based on your site requirements.
We offer a variety of adjustable bases, from 23.5mm heights through to 170mm. Simply select the right base for your application, which can then be adjusted on site to the required height.
PV 2.3/3.5 – Base with heights between 23mm and 35mm.
PV 3.5/5 – Base with heights between 35mm and 50mm.
PV 5/8 – Base with heights between 50mm and 80mm.
PV 8/11 – Base with heights between 80mm and 110mm.
PV 11/14 – Base with heights between 110mm and 140mm.
PV 14/17 – Base with heights between 140mm and 170mm.
EXTENDING YOUR RISER BASES
All our standard base heights can be extended using our F30 extension piece. Up to 9 number 30mm F30 extension pieces can be used on each Riser Base height to achieve higher levels as required.
Riser Top Plates
- Risers
After selecting the appropriate riser base, it’s time to choose your top plate. All top plates are designed to fit seamlessly into any base or side plate, allowing you to pick the one that best suits your application. Whether you’re working with paving, aluminium tracks, or wooden/composite joists, simply select the top plate that meets your needs.
TOP PLATE OPTIONS
C3/4T 3MM Joint – Top plate for porcelain and concrete paving.
CO – Top plate with a flat surface to use when placing additional plates under porcelain and concrete paving, where a spacer is not needed.
C3/4T BT 3MM Joint – For use on paving, with a self-adhesive layer which gives extra fixing support essential for balconies, terraces or flat roofs to reduce the risk of wind lift. Can be used just on the outer row.
C-Clip – Top plate compatible with Pavetuf Aluminium Support System. Width between the lugs is 76mm.
CPV+ – Top plate for wooden or composite joists with a 5-point, rotating fixation at the side to ensure the joist is centered on the plate. The width between the fixation and the lug is 75mm.
F30* – The F30 Extension piece adds 30mm to the riser support, and fits in any base or side base. These are 30mm sections, with a maximum of 9 allowed per riser.
We recommend you visit the Knowledge Hub for further information, advice and FAQs.
Length 1 (mm)
Length 2 (mm)
Width (mm)
Height (mm)
600
600
500
500
900
900
500
500
Diameter (mm)
Height (mm)
600
500
750
500
950
500
-
Width (mm)
Depth (mm)
Height (mm)
Steel Thickness
-
3003003002mm
-
4004004002mm
-
5005005002mm
-
6006006003mm
-
8004004003mm
-
10004004003mm
-
10005005003mm
-
12004004003mm
-
12005005003mm
Send us a message
"*" indicates required fields